Twin-cylinder electro-hydraulic synchronisation with imported closed-loop linear scales, a stress-relieved welded frame and bending accuracy of +/-0.05 mm. The mechanically crowned table keeps long parts consistent and the machine can be extended into a robotic bending cell.
Closed-loop linear scales control the ram position; combined with a rigid frame this keeps bending accuracy and repeatability consistent.
A mechanically crowned worktable with closely spaced compensation points and no blind spots: long parts no longer sag or open up in the middle.
Enter plate thickness, material, length and angle and the system calculates bending force and bottom dead centre automatically, so even newcomers can start.
Closed-loop hydraulics, a servo back gauge and precision screws with linear guides keep the machine reliable over the long term.
Can be equipped with robotic loading and a material store, upgrading to a robotic bending cell for unmanned production.
Machine warranty, on-site training and OEM spare parts, with fast remote diagnosis and on-site service.
Vibratory stress relief removes internal stress and the gantry machining centre machines in one set-up: high rigidity, minimal distortion.
The gap between ram and table is measured directly, unaffected by frame deformation, for accurate synchronisation.
Closely spaced compensation points keep long parts from sagging in the middle and hold the angle consistent.
AC servo motors with precision screws and linear guides: repeatable positioning and any multi-axis combination.
| Configuration item | Description | Applications |
|---|---|---|
| Multi-axis back gauge | X2 / R1 / R2 / Z1 / Z2 axes | Complex parts formed in one pass |
| Tandem | Two identical machines synchronised for very long parts | Elevator door panels and long beams |
| Robotic bending cell | Robot + material store + fixtures | Unmanned volume production |
| Special tooling | Standard / sectional / custom punches and dies | Special bend shapes |
| Safety light curtain / laser guarding | Operator safety | Compliant production line |
High mix, low volume; quick changeover and consistent angles on all four sides of the enclosure.
Long parts no longer sag in the middle and door panels stay flat.
+/-0.05 mm accuracy, less fitting and rework downstream.
Fill in your details to receive the documents below by email.
It comes from the welded and stress-relieved frame, closed-loop control of the ram with imported linear scales, and the mechanically crowned worktable. Every machine is verified with a laser interferometer before shipment.
Bending force is calculated from plate thickness, bending length and material, with a 20% margin. Use the online selector on the home page or confirm with an engineer.
Yes. This model can be equipped with the SD-RC robotic bending cell and a sheet material store for automatic loading and unmanned production.
Standard configurations ship in about 30-45 days with a 12-month machine warranty, installation and commissioning, operator training and OEM spare parts.
Tell us the material, plate thickness and bending length; an engineer confirms the machine, tooling and lead time and replies within 1 working day.